OPERATION

FREQUENCY SELECTION

The receiving frequency is selected by the combina tion of the MHz dial and main tuning dial settings. The MHz dial selects the band at every 1 MHz and the main tuning dial selects the frequency at 10 kHz increment from 0 to 990 kHz in the band. The combination of these controls is shown in Table 2.

AMATEUR BAND RECEPTION

SSB Voice Signal:


Most amateurs use LSB on frequencies lower than 10 MHz and USB on frequencies higher than 10 MHz.


Set the controls and switches as follows;
POWER OFF
BAND Desired frequency segment
ATT NOR
TONE NOR
VOLUME Desired listening level


Table 2


Return to FRG-7 Index Updated 21 June, 2001 Maintained by Kent Walker